hot Product

FOAM SHEETS

Perforated TPU Foam Sheet Foam Sheet

M-TPU Foam Sheet Foam Sheet

M-TPEE Foam Sheet Foam Sheet

M-PEBAX Foam Sheet Foam Sheet

MPP Foam Sheet Foam Sheet

PVDF Foam Sheet Foam Sheet

FR-MPP Foam Sheet Foam Sheet

Microcellular Aliphatic TPU Foam Foam Sheet

M-ATPU Foam Sheet Foam Sheet

MPEBAX Foam Sheet Foam Sheet

MTPU Foam Sheet Foam Sheet

MTPEE Foam Sheet Foam Sheet

hot Product

PRODUCT

MTPU Adults Yoga Mat Mat

MTPU Fitness Mat Mat

MTPU Baby Play Mat Mat

MTPU Kids Yoga Mat Mat

WHO WE ARE

ABOUT
US

Advanced Process Technology

Suzhou Shincell New Material Co., Ltd.

Shincell is a company dedicated to developing sustainable foaming technologies and manufacturing clean, environmentally friendly lightweight foam materials.

And it's a professional China high-strength foam materials manufacturer and microcellular foam board factory.

We use N2 and CO2 gases commonly found in the air to expand plastics and form a large number of micro and nano bubbles inside, a purely physical foaming process.Shincell was founded by Dr. Xiulei Jiang. He started his research on supercritical fluid foaming technology at East China University of Science and Technology in 2003 and proposed the technical process of supercritical molded microcellular foaming. His early interest lies in lightweight and high-strength foam materials, and his main product is PP microcellular foam sheets.

APPLICATION FIELD

Sports & Footwear Shincell specializes in the development and green manufacturing of clean and environmentally friendly high performance lightweight polymer foams.We use N2 and CO2 gases commonly found in the air to expand the plastic and form a large number of micro and nano bubbles inside. This is a purely physical foaming process with no chemical blowing agents added and no chemical cross-linking during the foaming process. Compared with traditional foaming materials, our material is recyclable, non-toxic and environmentally friendly, and meets the needs of sustainable development. Our solution solves the pain points of traditional foamed shoe materials which are toxic and harmful, not durable and not friendly to the environment, and greatly increases the compression resistance and resilience performance. TPU foam sheet is suitable for insole, midsole and filler. PEBA/PEBAX and TPEE foam sheetl are more suitable for midsole. Shincell's sustainable solutions： 1.The decomposition of existing chemical foaming agents for footware materials produces harmful substances and irritating odors Shincell - foaming with air, colorless, tasteless and non-toxic, belongs to the "three free products" 2.EVA foaming material performance decay and poor durability Shincell-can achieve self-repair, continue to provide a surge of power and gentle care 3.Limited choice of materials, performance into the bottleneck Shincell - a variety of high-performance elastomer support, combat power explosion 4.Existing footware materials are not friendly to the environment and cannot be reused Shincell - recyclable and bio-based raw materials 5.High unit cost of new foams already on the market Shincell-optimized process to achieve higher cost performance

Exercise mat & Mattress Shincell is currently the only company in the world that can provide environmentally friendly, high-performance sports mats. Our mat material uses TPU microporous foam one-piece foaming material (non-popcorn foam), using supercritical fluid foaming technology, using only N2, CO2 gas foaming, no cross-linking agent, no chemical blowing agent, clean process, safe and environmentally friendly. And our supercritical fluid foaming TPU got the Reach test conclusion: 201 harmful substances ND (not detected, the smallest unit of existing test technology failed to detect in the material), 0 harmful substances. Features of exercise mats in M-TPU: 1.Easy to clean, just wash with water 2.Good permanent compression performance, no denting after long time use 3.Fingernails scrape hard, no scratches 4.Long-term use without debris 5.Long-term use will not be sticky 6.Strong durability 7.Portable 8.Easy to spread, no wrinkles Features of environmental mattress in M-TPU: 1.Supercritical physical foam with zero VOC and no odor. 2.Physically foamed TPU with zero added chemicals. 3.Rebound 65%. 4.non-cross-linked, 100%recyclable. Physical foaming M-TPU makes it possible to recycle mattress foam!

New Energy Batteries Pads Shincell provides lithium-ion battery cell cushioning sheet: FR-MPP foam sheet. High flame retardant, low density, stable stress output over a wide range of deformation. Shincell's battery mat solutions are designed to provide designers with a high performance option that can withstand fluctuations in pressure and temperature. 1.Sealing and fastening of battery housings FR-MPP10 sheet is the preferred solution for sealing and protecting battery housings with very good compression and deformation properties, outputting stable stresses over a wide range of deformations to protect them from potential damage caused by the elements and road debris. 2.Matting on the bottom of the battery housing Applied between the battery housing and the shield, the FR-MPP15 sheet is able to compensate for assembly tolerances and insulating cushioning. 3.Anti-shock pads to isolate vibrations Packing is also required between batteries to absorb internal shock energy. Vibration must be managed both within the pack and between the pack and the vehicle. FR-MPP25 resists collapse caused by the stresses of compression and temperature, extending the life of the battery by continuing to seal and absorb shocks. In addition,PVDF self-fire retardant properties make it can also be used in the field of battery cell use.

5G&6G Communication Shincell's microwave radomes are made of MPP foam sheet and play a critical role in the continued development of mobile networks for 5G and 6G systems that reach millimeter wave band frequencies. It solves the pain point that traditional microwave radome can't meet the demand of microwave antenna with wide frequency from 4 to 80 GHz. The advantages of MPP foam sheet in antenna field: 1.Low dielectric constant, low dielectric loss, dielectric constant as low as 1.06, dielectric angle tangent <0.0009. 2.High strength, meet the wind resistance requirement. 3.Meet the outdoor photo-oxidative aging requirements of more than 10 years 4.The surface does not hang water, the surface has a super hydrophobic layer similar to the surface of lotus leaves

High-speed Rail&Aerospace Supercritical foam materials are used in automotive interiors, rail transportation and other fields, the product density is as low as 0.036g/cm3 to meet the demand for lightweight materials; UL-94V0 level flame retardant, no smoke toxicity during combustion, which can improve the safety performance of batteries, airliners, high-speed railways and other products. Main products: FR-MPP foam sheet M-TPU foam sheet; M-TPEE foam sheet; here are unique advantages: 1) No VOC, no odor, completely solve the bad smell problem. 2) Light weight, density can be as low as 30Kg/m3, can reduce the weight of the whole car; 3) Light weight and high strength, with comprehensive mechanical properties better than traditional foaming materials. 4) Non-cross-linking enables recyclable. 5) Excellent heat insulation, shock absorption, waterproof and sound insulation properties. At present, the parts used in the field of transportation are mainly automobile roof, trunk cover, automobile ventilation duct, roof cushion, waterproof door film, automobile seat foam, sealed shock-absorbing parts; the parts of high-speed rail and subway car are mainly seats, composite panels, sealed shock-absorbing parts, as well as in aviation&aerospace

CMP Mat Chemical mechanical planarization (or polishing) [CMP] is a critical step that is used multiple times in the semiconductor manufacturing process at each layer of the wafer to remove excess materials and create a smooth surface. This is done through the interaction of a pad and slurry on a polishing tool. Pads and slurries are consumables used in the CMP process, and should be selected based on needs for technical performance, process optimization, and/or cost-of-ownership. Main Products: M-TPU foam sheet Semiconductor material is an important part of the wafer production process, and the wave of wafer fab construction will drive a surge in demand for polishing pads. Domestic materials have obvious price and service advantages, led by mainland China's fab building boom is expected to drive the accelerated development of domestic semiconductor materials manufacturers, CMP polishing pads as one of the core materials for semiconductors, the progress of localization is expected to speed up. Shincell’s newly developed materials M-TPU foam sheet is by supercritical physical foam technologies, we expect to develop TPU-based CMP polishing pads within 2 years to help the development of China’s semiconductor industry

Tube &Pipe Insulation High performance cleaning pipe and pipe insulation system Shincell is currently the first factory in the world to achieve TPU & TPEE & PEBA/PEBAX sheet foaming and the second to achieve PVDF sheet foaming, and our foaming technology is supercritical physical foaming, the material is non-toxic and odorless, very environmentally friendly and recyclable. Based on the material properties of PVDF, we can provide high performance cleaning tube and pipe insulation systems for the industrial sector of biological cleanrooms and sanitary operations, with the aim of reducing operating costs and eliminating the risk of cleaning room contamination. As PVDF sheets were previously monopolized by some big companies and the cost was extremely high, SHINCELL's PVDF can get the function of cost reduction and efficiency, allowing more bio-manufacturing fields to use this high performance material. PVDF foam material is very ideal for insulation. Main Products: PVDF foam sheet It can easily insulate and subsequently reduce energy loss from valves, heat exchangers, filters and reducers, as well as eliminate all condensation associated with cold water, as well as being able to withstand all temperatures, as well as withstand the rigors of ever-increasing temperatures in a given condition. This material is also extremely resistant to bacterial growth, exceeding the challenges of the industry standard ASTM G21-15.

ADVANTAGES

Excellent and stable product quality

The company's raw materials are mainly from BASF, Huntsman, DuPont, first-class production process design and process control, each batch of products more stable, to obtain efficient production control.

World leading technology

We are the first company in the world to realize TPU/TPEE/PEBA/ PA12 sheet foaming and the second company in the world to realize PVDF sheet foaming, with leading technology and advanced equipment, and with strong market competitiveness.

Continuous and reliable product supply

The company has sufficient production capacity and a high degree of control over the quality and stable supply of raw materials, laying the foundation for continuous production.

Fast and intimate extended service

The company has always insisted on seamless service, carefully built an after-sales service team consisting of technical backbone, helped customers solve problems, established a customer file system, and strived to make the after-sales service faster and more intimate.

LATEST NEWS